Then click button to confirm the setting. System can manage all the record mark information of current channel by default. Results are sorted by popularity, with better matches higher in the list. Here you can select to search the picture or the recorded file. Green color stands for regular recording, yellow color stands for motion detection and red color stands for alarm recording.
The default is admin and 123456. When you connect it to the computer, the light stays on red but the computer asks to put in a card in device if you try to access the drive. There are total 8 direction arrows. Select icon of several dates, all checked items can be edited together. Double-click again to return to the previous screen display. There are three ways for you to go to manual record menu.
Zoom Focus Iris Click icon to adjust zoom, focus and iris. See while the guide is Customize Your TiVo Remote to the right. Six options: lowest, lower, low, medium, higher and highest. Tips Check the box Startup button here, system goes to startup wizard again when it boots up the next time. If there is other motion detected during the interval period which is considered continuous movement;.
There are color bars for your reference. If there is still motion when one section ends then it will start a new section. The default is admin and 123456. Click to switch to next or previous picture. Timestamp Edit You may need to update the internal clock for the timestamp shown in images and videos. Please refer to Chapter 3 Main Menu Setup Guide for more details. Please disconnect the power before being connected to other devices.
If the set date is overdue, the record files will be deleted automatically. Camera operation: In the standby mode, press the K2 key, blue light, red lightoff, began to take pictures and save time and blue lights out of the finishedaccording to machine vibration red light, re-enter standby mode. The below are the details at different settings. Note: after changed the language and video output, the device needs to login again. Before installation and operation, please read the following safeguard and warning carefully! At the same time, it supports 3G network.
Click delete the current picture. Definitions and descriptions of network stream: Parameter Meaning. I have tested it several times during the day and it seems to work fine, but after sitting overnight, the motion detection is not activated again unless I turn it back on and set it back in to motion detection mode? After playback, you can use time or the mark key words to search corresponding record and then play. Green This show will be saved until you delete it. You can see current channel name is grey such as channel 1. Separate recording while charging camera andautomatically cycle the camera.
Movies Browse movies that are available either on channels you receive or from Suddenlink Video on Demand. Press K1 key,machine vibration and the first red light off the blue light flashes 3 times afterthe destruction, at this time recording, and then short press K1 key, machinevibration and save the recording out blue light, red light and go into standby. It will record in short chunks of video. Baud rate: Select baud rate. Fig 4-18 schedule configuration-sensor 4.
Don't enable record function or incorrect setup. Camera, press the K2 keymachine vibration time to stop recording and save the red light to enterstandby mode. To record: tick off recoding channels, it will record the camera when alarm triggered. Please connect the peripheral device first, click snap button on the full-screen mode, you can select or create path. The blue indicator will light up and vibrate and the red one will go out momentarily and come back when ready to take the next picture. Do it before power off.
After you enabled this function, system can snapshot when the corresponding alarm occurred. For example I changed the date to show a random date in 2010. The default is admin and 123456. Language: setup the menu language. System supports custom snap picture saved path. Press the blue button on your TiVo remote to change how the list is sorted. Z configuration-serial port Step2: tick off Enable, setup the value of address, baud rate and protocol according to the settings of the speed dome.